Category Archives: Scanners / Receivers / Software

Receivers, scanning receivers aka scanners and software to use for scanners.

CES 2016 – PART 2 – MIDLAND and WHISTLER BOOTH

In part 2 of CES 2016 we inform you about what was shown in the booth of Midland USA and Whistler.

MIDLAND

01Booth of Midland USA

The theme for Midland this year was all about being E+READY.
The booth was a kind of ‘EMERGENCY PREPAREDNESS CENTER’ and showed mainly Emergency Solutions by Midland.

02Line of E+Ready products

The weather in USA is different from Europe. It seems the weather can change more rapidly to more dramatic circumstances. There are large areas that suffer from tornados. The long distances sometimes prevent for rapid response in case of emergencies. Popular outside the cities is NOA Weather channels. Even many CB Radio have weather channels were you can listen to the weather forecast.

03

The range of Midland USA Emergency Solutions offers:
• Emergency crank radios
• Emergency portable weather radio
• Emergency portable chargers
• Emergency set of two-way radios

Midland Europe introduced some time ago a crank radio for the European market, the type is ER300.

04Midland Europe crank radio type ER300

FLYING COW

To show how huge a disaster can be Midland showed a ‘flying cow’. A kind of tornado was created in a showcase and a small cow was flying around in the air. Mother cow was standing on the ground and looked desperately to the young cow flying around. Funny idea but no idea or this will help selling the emergency products. But at least it caught our attention. But for those who want to be storm chaser Midland offers some good products.

05Tornado Showcase

06aThe Flying Cow                                                      Sad Mother Cow

LIKE EUROPEAN GB1

07More interesting than the flying cow was the little truck in the Midland booth. Mounted in the vehicle was the Midland MicroMobile Two Way radio type MXT100.

Midland MICROMOBILE™ GMRS Two-Way Radio is the latest innovation from a leader in Consumer GMRS Two-Way Radios. With an ultra-compact design which mounts just about anywhere, the MICROMOBILE™ is great for RVing, Road Trips, ATV/UTV activities, and on the Farm or Ranch.
A Full 5-Watts of Power with an external magnetic mount antenna, offers
extended range capability. Best of all, the MICROMOBILE™ provides the ability to talk to other Midland and most other GMRS Two-Way (Walkie-Talkie) Radios.

In Europe we have a similar model radio from Midland called the GB1. In USA it is a GMRS and in Europe it is a PMR446. The frequencies for both models are different and can not communicate together. What is similar is the fact that the antenna from both models is fixed to the radio by a coax cable.

In future Midland USA will introduce new versions of MXT100 with higher output power. For higher output a license is needed for GMRS in USA.

WHISTLER

The Whistler brand is not well known in Europe. They sell many different electronic devices like radar detectors, power inverters, navigation and scanners. New on the booth were wearable electronic flashing lights to mount on shoes, helmets etc.
Our attention was mainly for the scanning receivers.

08Scanner part of Whistler booth

A few years ago Whistler took over the scanner line from GRE. All models are built for the USA market and not specific for Europe. In UK you find will find some traders that import this brand, but Uniden is by far the leader for scanning receivers in Europe and USA.

09Wayne Willson

The scanner specialist from Whistler is mr Wayne Wilson. He is a friendly man, always present at CES to answer questions from visitors about the scanner line.
He has been working during many years for several scanner brands and is now the Whister scanner specialist and manager.
In USA the scanners are distributed by a selected group of retailers, mainly HAM related.

NEW WHISTLER MODELS

10WS1088 and WS1098

Wayne proudly talked about the new scanners WS1088 and WS1098. Both models cover some of the recent trunking systems used in USA. Whistler does not have a solution or plans to introduce a scanner that will cover the European TETRA network.

So far Part 2 of CES 2016, next time what we saw and heard at CB Distributing and new comer on USA market President USA !

CES 2016 – PART 1 – COBRA BOOTH / UNIDEN

01World famous logo of CES

Early January is always the traditional CES in Las Vegas. Most brands are available with a booth or a suite to receive customers and display products.

UNIDEN

Watching the short video we made from CES you will see that there is no video shot from a Uniden booth. Since several years Uniden is not present with a booth at CES. Often they do have a suite in one of the hotels. There they talk to customers and show new products. But this year Uniden USA is absent. We met a friendly Uniden sales man on the show talking to distributors, but that was all. One of the USA distributors showed some Uniden products at CES, so they were not totally absent for the public.

COBRA BOOTH

Each year COBRA is present with a booth to show the existing and new products. This year Cobra moved from Central hall to a smaller booth in the North hall.
Last year the shares of Cobra were purchased by an investing company.
The market is waiting for the moves they will make. Until now it seems ‘less expenses’ as there were no exiting new products introduced at CES this year.

CB – TWO MODELS SHOWN

02Cobra LX BT, 40 Channel AM, great radio but not new

The first CB shown was the CB29LXBT. This radio looks the same as the European Cobra 29LXEU. But this is the American BT version. BT stands for Bluetooth. A great radio, very popular by USA truckers, but not a new item.
The BT option makes it possible to make and receive hands free cellular calls through the CB radio.

03Cobra C75WXST, 40 CH AM, remote CB

The C75WXST is a remote CB. In Europe we supply a similar model from Cobra the Cobra 75STEU. It is a great concept, but not very popular in the truck market.

Other Cobra CB Models for USA market like C19DXIV, C18WXSTII,
C25 models, several C29 Models and HH portable models are still available but not shown at CES.

COBRA MARINE

At CES Cobra showed two mobile and two portable models for marine applications. The total range is four mobiles and four portable models. The models shown are for the USA market only and not for the European market. Here we use different channels and different functions.

04Mobile Marine Transceivers

05Portable Marine Transceivers

CONSUMER PRODUCTS –DSP9200BT

06Cobra DSP9200BT

For DSP9200BT Cobra received a 2016 CES innovation award. Cobra tells us:

“The DSP 9200 BT is the most advanced system in its class and the company’s first digital detector, improving on detector range and performance. It embeds advanced technology for precise notifications through Digital Signal Processing (DSP), which identifies alerts from unwanted noise for greater reliability and frequency. The unit scored highly across all judging criteria, and it joins a small percentage of other products that are given this honor each year. Products are judged based upon several criteria including, but not limited to: engineering qualities, aesthetic and design qualities, intended use or function and user value, unique or novel features consumers would find attractive and how it directly compares to other products in the marketplace.

The DSP 9200 BT is the first detection system developed by the company that leverages the advanced precision and power of DSP technology, and we couldn’t be more pleased to be recognized by the most prominent awards committee in the CE industry for our constant improvements to our new and existing product lines.”

CONSUMER ITEMS

Cobra clearly choose to show products for the larger markets like dash cams, radar detectors, power inverters etc. The radar detectors are totally illegal in most European countries. In The Netherlands, where Avera-Distributing is based, a dealer will be fined Euro 500 for each radar detector the Dutch FCC finds in the warehouse. So no need to explain that there is no trade for radar detectors in European countries that have similar regulations.

07Cobra inverters for truckers

In CES Part 2 more news from this show.

DIRK THE DUTCH DAIRYMAN THAT BOUGHT A TRUCKSTOP

1
After World War II  many young Dutch farmers have moved to the USA and Canada. There was not enough space in The Netherlands for large scale farming, so they decided to go West. Travelling in USA and Canada you still can find typical Dutch family names. Seeing such a typical Dutch family name is always a good reason to start a conversation. Many are second, third or fourth generation and they do not speak Dutch at all. But some still do and even have the local accent from the area the (grand)parents came from.

This year we met a tall man with the name badge ‘DIRK BINNEMA’. That family name is typical for Friesland, an area located in the northern part of The Netherlands. Enough reason to start a conversation. He told us he moved to the USA around 2002 so he still spoke his native language without any problem.

2Dirk and Ellen Binnema

Dirk Visitekaartje

Dirk even was in the same business as we are, he and his wife Ellen are the proud owner of an American truckstop called ‘PLANEVIEW’ in the city of Oshkosh in Wisconsin.

BUYING A TRUCKSTOP

Dirk and Ellen’s story begins in Friesland, the Netherlands. Dirk grew up on a dairy farm and Ellen lived not far from him on a crop farm. Dirk studied agriculture, and in 2001 took a farm tour in the US. Soon he returned with his mother, and visited Wisconsin. They were excited about the friendly people they met, and the American way of life. Dirk decided he wanted to remain in the US permanently and start or buy a dairy farm.
His adoptive family, Ron and Judy Brath, welcomed him into their home, and looked for business opportunities here. In 2005, Ron discovered that Planeview Travel Plaza was for sale. He helped throughout the sale, and Dirk became a Wisconsin business owner!
Since that time Dirk is promoting his business with the slogan “Dirk, The Dutch Dairyman That Bought A Truckstop”.

drie

CB SHOP

Every good truckstop or travel center in USA has a section where they sell CB radio’s and a line of accessories. In Dirk’s shop you will find transceivers from Uniden, Midland and Cobra. Also antennas from Wilson, K40, RoadKing and more.

4Part of the shop, antennas, cb transceivers and ‘hiking sticks’.

GIFT SHOP AND RESTAURANT

In addition to all of snacks, beverages, and goodies in the convenience store, there is also a gift shop located inside Planeview Travel Plaza. With a variety of unique items and souvenirs, there is something for everyone. The fun part is that they have many Dutch gifts available for everyone to experience a small part of the Dutch heritage, including the very popular Wooden Shoe Slippers!
They also sell typical Dutch food like ‘hagelslag’. Some American people buy this stuff without knowing how to eat this. This results in some good hilarious stories, so Dirk tells us.
But there is serious food business in Planeview as well and in the kitchen they also make food based on Dutch recipes.

vijf

CERTIFIED CAT SCALE

Travelling in USA you will see weight stations near every state border. Overweight is common in USA for people, but not allowed for truck loads.
Planeview Travel Plaza has a Certified CAT Scale at the Truck Stop to weigh an entire truck and trailer unit while passing through or before heading back out. With strict weight regulations and fines associated with violations, ensuring you are under the weight limit is extremely important.
When using the CAT brand scale, the driver is covered by a guarantee – if you receive an overweight fine after weighing legal on a CAT Scale, CAT will either pay the fine or appear in court with you in order to get the ticket dismissed. In either case, the driver will not pay the fine as long as you were weighed on the CAT scale prior to the citation.
This kind of service is not very common in Europe.

6website www.planeview.biz

If you want to know more about Dirk’s business ‘Planeview’ visit his website. And if you are in USA near Wisconsin, stop for some Dutch food and hospitality.

 

FINALLY IN EUROPE: THE FIRST VEHICULAR PMR446 IN THE WORLD!

At CES Las Vegas in January this year Midland USA introduced a mobile version of the USA version of European PMR446. (See my blog of 14 January 2015).

Midland Europe promised to have a similar European version very soon and now they claim to have it available mid-December of this year.
It is called the Midland GB1.

fotoMidland GB1, Transceiver PMR446 with ‘fixed’ magnetic mount antenna

Midland GB1 is a PMR446 portable transceiver. Mobile versions for this European standard is not allowed, but Midland found a legal way to bring this
on the market.
The technical standard for PMR446 tells us the antenna must be fixed to the transceiver. If that is not the case you can create a mobile device for PMR446 and that is not allowed.
The trick is that the standard does not describe how the antenna is connected. Midland chooses to have a fixed antenna, but there is a coax cable of 4 meter between the radio and the antenna, and so the coax is part of the antenna system.
A technical legal solution that makes it possible to create a ‘mobile’ device for PMR446. We only can say “Midland WELL DONE” as this will be a good solution for many users.

First shipment from Midland to Avera-Distributing is expected mid December. Place your orders now to get supply from the first delivery.

This what Midland has to say about the new midland GB1:

Midland introduces into the market the first vehicular PMR446 ever realized.
GB1, small and compact, has a metal chassis guaranteeing sturdiness and durability.
Even if reminding you of a CB, it works on the frequencies of a standard PMR466, with the advantage of not being subject to interferences and noise generated by vehicle engines.
The integrated magnetic antenna and the 12V socket allow immediate installation and a wider range than a CB.
Ideal for campers, cars and campings, GB1 can be used as a base station to talk to any walkie-talkie in range and use the PMR446 as never done before.

Main features:
– Microprocessor-controlled frequency
– ‘Flip’ function: the radio can be mounted with the speaker facing up or down; the display can read in either orientation
– Adjustable squelch on 9 levels
– SCAN function
– LCD display
– Integrated magnetic antenna
– TOT (Time out timer)*
– Side tone: noise blanker at end of transmission
– Monitor function
– Busy channel (BCLO-Busy Channel Lockout)*
– Broad/narrow band selection 25KHz/12.5KHz (only export version)*
– High/low power (only export version)

*Software programmable

Technical specifications:
– Frequency: 446.00625 – 446.09375 MHz (440 – 471MHz export version)
– Channels: 8 + 91 programmable with CTCSS
– Channel spacing: 12,5KHz ( 12,5KHz / 25KHZ export version)
– Output power: 0,5W (5W export version)
– Power supply: 12,6Vdc

Packging and codes:
Midland p/n CTE C1198 = Midland GB1
Box single pack:
Radio, microphone, microphone holder, integrated wired magnetic antenna, mounting bracket, fixing screws, supply cable with 12V car charger.

Programming software:
Midland p/n CTE C1227 = Midland PRG-GB1
Complete with USB cable to connect to a PC.

tweede fotoMidland GB1, Transceiver PMR446 with ‘fixed’ magnetic mount antenna

ENERJUMP LINE

01

After the great success of ENERJUMP, Midland widens the range of jump starters to be able to startup any kind of vehicles, by introducing two brand new models: ENERJUMP WORK and ENERJUMP TRUCK.

All these models have been created with the aim of being used for different types of vehicles with different displacements.

ENERJUMP TRUCK – cod. C1184.0202

03JUMP STARTER FOR HEAVY VEHICLES

ENERJUMP TRUCK is the most powerful jump starter of the Enerjump family. It has been designed to jump start heavy vehicles and is able to restart both 12V and 24V batteries with a displacement up to 11.000CC.

It is the ideal tool for roadside emergencies and thanks to its performances, it is particularly indicated for being used on trucks, vans, off-road vehicles, campers, agricultural vehicles, cars, boats, etc.

ENERJUMP TRUCK is easy to use, place and carry.

Using ENERJUMP TRUCK is very easy: if the battery of your vehicle is dead, connect the clamps in parallel (without disconnecting the vehicle’s cables from the battery) and start your vehicle!

Thanks to its particular design and compact size ENERJUMP TRUCK can be easily stowed in tight spaces or between the seats of your vehicle, while the built-in handle allows to easily take it with you.

The chassis with shock-proof corner reinforcements and the professional clamps with big-section cables make it an indispensable and top quality device.

ENERJUMP TRUCK is supplied with ‘Smart Jump Start System™’ that allows:

– Automatic detection of the battery voltage
– Protection against short-circuits
– Protection against the polarity inversion

The 5-led indicator clearly shows the charge level.

COMPLYING TO CE

What’s in the box:
– Jump starter with cables and clamps
– Wall charger
– Cigarette lighter power cable

04
Technical specifications

– Capacity: 24000mAh
– Input: 14V/1A
– Output: 12/24V
– Start current: 500A (12V) / 250A (24V)
– Peak current: 1000A (12V) / 500A (24V)
– Weight: 1600g
– Dimensions: 21 x 23,7 x 7,5cm
– Lifetime: >1000 cycles

ENERJUMP WORK – cod. C1184.01
0506

ENERJUMP WORK is the intermediate model of the ENERJUMP line.

ENERJUMP WORK is able to jump start vehicles with a 12 battery and a displacement up to 6000CC (petrol) and 3000CC (diesel).

It is suitable to be used on vans, off-road vehicles, campers and cars.

ENERJUMP WORK is also a powerful power bank with 2 USB ports that simultaneously recharges portable electronic devices such as smartphones, tablets, digital cameras, action cameras, etc without the need of a main socket. It can recharge your iPhone up to 7 times!

ENERJUMP WORK has two further sockets: a 12V socket to recharge portable coolers and another one of 19V for the recharge of your Notebook.

The device is fitted with intelligent clamps with ‘Smart jump start system™’  that:

– Automatically detects the battery voltage
– Prevents short circuits
– Protects against the polarity inversion

ENERJUMP WORK is equipped with a 5 led charge indicator and a powerful led torch 100L to ensure you will never be in the dark and that is able to launch an SOS flashlight in case of emergency.

COMPLYING TO CE

What’s in the box

Semi-rigid case including:

– Jump starter
– Clamps with ‘Smart jump start system™’
– Wall charger
– Cigarette lighter power cable
– USB to micro USB cable
– Notebook connector set

07Technical specifications:

– Capacity: 18000mAh
– Input: 14V/1A
– Output: 5V-1A / 5V-2A / 12V-10A / 19V-3.5A
– Start current: 300A
– Peak current: 600A
– Weight: 615g
– Dimensions: 23 x 8,7 x 2,7 cm
– Lifetime: >1000 cycles

ENERJUMP – cod. C1184
08
09A
ENERJUMP is the first model of the Automotive line.

It’s a compact jump starter – the smallest one of the Enerjump family – but powerful enough to provide an instant startup of vehicles with a 12V battery with a displacement up to 3000CC (petrol) and 2000CC (diesel): it’s particularly indicated for motorbikes, scooters, quad, cars, campers, etc.

But ENERJUMP is also a powerful powerbank with USB port able to recharge several times portable devices such as tablets, smartphones, BT intercom, XTC action cameras, mp3, etc.

It recharges your iPhone up to 3 times!

ENERJUMP is fitted with a 5-led charge indicator and an intense led flashlight that in case of emergency lights up an SOS signalling (intermittent light).

COMPLYING TO CE

What’s in the box

Soft case including:

– Jump starter
– Jumper cables with clamps
– 12V car charger
– Wall charger
– USB to micro USB cable

10Technical specifications

– Capacity: 8000mAh
– Input: 12/24V – 1A
– Output: 5V – 2A
– Car starter: 12V
– Start current: 200A
– Peak current: 400A
– Weight: 300g
– Dimensions: 13 x 7,5 x 2,5 cm

D-200 IS MIDLAND’S FIRST DIGITAL RADIO

Recently Midland introduced their first digital PMR radio. This is what they say about this new product:
D200 Photo HQ2
This innovative device allows you to communicate using two different protocols:
– DPMR446
– PMR446
Digital technology offers important new features: first of all, it enhances communication quality, which is much clearer than with the analogue system.
In addition, digital audio processing significantly reduces sensitivity to noise and interference.
Being new on the market the digital bandwidth is less congested than analogue frequencies.
It has twice as many (16) channels as in classic PMR446, being 8 analogue and 8 digital (these last onesyou  can even double by using the dedicated programming kit, partnumber C974.01.)
D-200 allows you to make individual and group calls. In particular D-200 comes with 3 customisable buttons that can be used to make three different types of calls – standard, individual and group calls. In addition, a powerful digital scrambler will protect communications from unwanted listeners and ensure maximum privacy.

Versions: DPMR446/PMR446
Colour: Black
Channels: 8 Analogic + 8 Digital preprogrammed
Tones: 52 CTCSS + 166 DCS
Export Version 5 Watt

SPECIFICATIONS
·· Analog/digital communication protocol
·· Automatic recognition of the analog/digital channel used and default mode reset (with the help of the programming software)
·· 16 analog/digital channels
·· Digital 6.25KHz filter
·· 166 DCS codes+ 52 CTCSS tones (analog bandwidth)
·· Individual and group digital calls
·· 32bit digital scrambler
·· Voice alert, Scan, VOX
·· High-capacity 1800mAh Li-Ion battery
·· External socket for 2-pin Kenwood
Accessories

PACKS AND CODES
Box single pack:
Radio, desktop charger, wall adapter, 1800 mAh Li-Ion rechargeable battery pack, belt clip
code C1159

PROGRAMMING SOFTWARE PRG 10
code C974.01
Customisation of channels and frequencies, digital scrambler

MIDLAND H5: FIRST OF NEW GENERATION OF ACTION CAMERAS

Recently Midland introduced the first model of a new generation of action cameras. The new H5 looks more like a GoPro, the leader in the market of action cameras.

1Midland H5 Camera with yellow cover, also a black cover is included
in the standard packing.

After the multi-year experience in this sector with the XTC models designed with a longitudinal shape, Midland presents the brand new H line, characterized by a frontal form factor, that completes the range of action cameras and covers all possible uses, such as the requirements of sportsmen or enthusiast of outdoor activities.

H5 offers a lot for very little! Its small dimensions and its ease of use make H5 the perfect solution for your leisure time or a daily use.

Its form factor allows it to be easily worn for example on your chest.
Midland H5 guarantees high performances: Full HD 30fps with a sensor able to take top quality pictures up to 12MP; the built-in Wi-Fi allows to watch and share your photos and videos, thanks to the dedicated APP iSmart DV, compatible with iOS or Android.

2The integrated 1.5 inch LCD display allows to frame or watch your videos and photos without the need of a smartphone or tablet.

The H5 is fitted with many innovative functions: self-timer (you can select the time delay to shoot a photo), Time-lapse, photo burst (to take 3/5/10 photos per second), Motion detection (the camera automatically starts recording when a movement is detected).

Besides, H5 continuously records and when the card is full, it records over the oldest videos; it is also equipped with the Slow Motion mode to watch the videos in rallenty.

H5 is supplied in a full optional packaging including 20 accessories to combine and create the best mounting solution for your requirements.

3Midland H5 in submersible case

H5 is fitted with 140° wide angle and image stabilizer for excellent shoots, even for your extreme adventures!

4all items included in the packing

PACKING INCLUDES:
1 Pc of H5 Action Camera.
1 Pc of Interchangeable Front Cover (Yellow or Black).
1 Pc of Submersible Case up to 30m.
1 Pc of Handlebar Mount.
1 Pc of Helmet Mount.
1 Pc of Ventilated Helmet Bandages.
1 Set of Tethers.
1 Pc of USB Cable.
1 Pc of Lens Cloth.
1 Pc of Li-Ion 900mAh Battery.
Supports, Adaptors for different Fixing Systems.

AVAILABLE ACCESSORIES:

Many accessories from the XTC series can also be used for the new H5 camera. This a list of Midland accessories.
XTC Chest Mount = Chest Mount.
XT POD-MINI = Monopod Mount 18 cm.
XT POD-2S = Telescopic Multicam 2-Section Monopod 80 cm.
XT POD-3S = Telescopic Multicam 3-Section Monopod 112 cm.
XTC Mount = XTC Mount for Handlebars and Tubes.
XTC Cap Mount = Cap Mount.
XTC Mount = Universal Mount for Rifles.
XTC Tree Mount
XTC Bow Mount
C980.01 = XTC SUCTION CUP MOUNT – Suction Mount for Cars.
C1042 = RAM Roll Bar Mount.
C1041 = RAM Magnetic Mount.
C1052 = RAM Moto Quad Mount.
C1067 = Memory Card 8GB.
C1067.01 = Memory Card 16GB.
C1067.02 = Memory Card 32GB.

In the world of electronics it is not always the best product that wins a race. The Midland XTC series is great in performance and price. But the look was different from action camera market leader GoPro. I think that is why Midland is starting with this new look but still the better quality supplied.

The Midland H5 is available from stock at Avera-Distributing.

NEW MIDLAND BLUETOOTH WIRELESS ACCESSORIES FOR PORTABLE RADIO’S

Using a portable radio is ‘handy’. Using a portable radio with audio accessories like a speaker/mike, headset etc. is even more ‘handy’. Less ‘handy’ are the cables that you need to connect an audio accessory with the portable radio.

Wireless Bluetooth applications are very popular for cell phone use and on (motor)bikes or when skiing. Bluetooth for use in combination with portable radio’s like PMR446 is getting more popular now.

Midland recently introduced 6 new products in their WA (Wireless Accessories) range. Midland’s new “WA” range of Wireless Accessories can be used with any Midland wireless transceiver (fitted with a 2-pin socket). All devices come with a rechargeable lithium battery, with a USB cable for charging.

The WA range includes:

Bluetooth adapter; WA-DONGLE for 2-pin radio’s, including Kenwood. Plug the WA-Dongle into your transceiver and choose from various headsets of the WA range to suit your needs.

There are 2 types of dongles available, for radios with a:
• 2-Pin Audio accessory jack with ‘Standard’ wiring
• 2-Pin Audio accessory jack with ‘Kenwood’ wiring

Bluetooth headsets; WA21/WA31/WA29.
Each headset features a small PTT button. WA headsets can be used with all mobile phones with Bluetooth function.

Wireless PTT; WA-PTT
Combined with a WA-Dongle, it allows you to transmit hands free without having to use the PTT button on the headsets.

Link / Photo / Short Description of the available Wireless Accessories items:

CTE C1199 = WA-DONGLE

1
WA-Dongle, Bluetooth Adapter suitable for Midland 2-Pin Transceivers.

CTE C1199.01 = WA-DONGLE-K

2
WA-Dongle, Bluetooth Adapter suitable for Kenwood 2-Pin Transceivers.

CTE C1200 = WA-PTT

3
BlueTooth, Wireless PTT suitable for WA-DONGLE.

CTE C1201 = WA21

4
BlueTooth, Ear Hook Earphone, In-Line Clip Microphone, In-Line PTT (Suitable for WA-Dongle) and Control Box with Clip.

CTE C1202 = WA31
5
BlueTooth, Pneumatic Earphone with Air Tube, In-Line Clip Microphone, In-Line PTT (Suitable for WA-Dongle) and Control Box with Clip.

CTE C1203 = WA29

6
BlueTooth, Behind the Neck Earphone, Boom Microphone, Spiral Wire with In-Line PTT (suitable for WA-Dongle) and Control Box with Clip.

Schematic use of possibilities of new Midland WA-series:

7With this new Midland WA-series the use of BlueTooth audio accessories is possible for many types of portable radio’s.

All items are available from stock at Avera-Distributing,
Actual pricing on our website, check the links in this Blog.

TOOL TETHERS: GEAR KEEPER’S UNIQUE POLYURETHANE ELASTIC CORE OFFERS 250% STRETCH FOR STRESS-FREE SAFETY.

Untitled-1We like to share a BLOG from GearKeeper.

Ergonomically constructed personal tool tethers are the key to maximizing worker productivity, convenience, safety and compliance. For heavy tools up to 11,3 Kg (25 pounds), Gear Keeper’s ergonomic anchored tool tether series is unique because it has been designed with a low-force polyurethane elastic core that has a 1:3 stretch factor (i.e. 90 cm (3’) relaxed – 270 cm (9’) extended. As a result, the new Gear Keeper polyurethane elastic core tethers have the shortest retracted length combined with the longest extension length offering significantly more stretch and retraction than competitive bungee-type core tethers.

The ability of Gear Keeper’s polyurethane elastic to retract to one-third of its extended length is a compelling safety advantage. The reduced length helps to avoid entanglement issues when climbing or working in close quarters. Additionally, to protect against dangerous ‘drop shock’, the new Gear Keeper heavy-tool tethers are load tested with a built-in safety margin beyond the breaking point.

Both of Gear Keeper’s new TL1-4021 and the TL1-4025 anchored tethers, with their polyurethane elastic cores, employ a very low stretch force. This minimizes arm fatigue at full extension, while still providing the proper degree of comfortable recoil. Employees will find their work more convenient and will appreciate the significant reduction in arm-stress. The ultimate result will be higher employee compliance with your tethering program.

The model TL1-4021 (€ 46,99) specifications include 2,54 cm (1”) tether webbing and two stainless steel carabiners load rated above 500 kgs (1100 + lbs.) with gates that do not hang up from a side load. It has a retracted length of 104 cm (41”) and extended length of 300 cm (118”).

The model TL-4025 (€ 42,99) specifications also includes a 2,54 cm (1”) tether webbing but has one stainless steel carabiner and a fixed web tool attachment loop. It has a retracted length of 127 cm (50”) and and extended length of 300 cm (118”). Both models are of an adequate length to attach to buckets.

For more information about the new Gear Keeper Tethers — or any of the companyʼs other innovative tethering products, the full line of Gear Keeper’s tool and instrument tethers, lanyards and accessories call
Avera-Distributing The Netherlands +31 76 596 3820.
You may also visit www.gearkeeper.com or www.gearkeeper.eu

SMART PHONE/GPS HOLDERS FOR MOTORBIKES by MIDLAND

1Hard case mounted on handlebar of motor bike

Over a year ago Midland introduced 9 motorbike holders for smart phone or GPS. Now Midland added 2 more versions, one for iPhone-6 and one for iPhone-6Plus.

Read what Midland has to say about these items:

“Starting from today fixing your smartphone or your GPS on the handlebar of your ‘two wheels’ won’t be a problem anymore!

Midland introduces a new complete line of water resistant holders to protect your devices – your travelling companions! – from rain, mud and dust.

Either you have a GPS or a smartphone it doesn’t matter: Midland places at your disposal 11 different models!

All these models are supplied with a water resistant holder and two different fixing systems for tubular and non-tubular handlebars included in the packaging.

The only universal fixing systems on the market!

The holders are made of sturdy material and the wide display is touch screen, to allow the use of your devices during your ridings and in any weather condition!

Untitled-5handlebar mounting kit

Their installation on the handlebar is very simple thanks to the supplied adjustable bracket that can be rotated 360°, so that the screen is always at your visual angle”.

SPECIFICATIONS:
• Water Resistant Touchscreen Holder
• Adjustable, rotating up to 360 degrees
• For all kind of Handlebars, 2 different brackets
o One for tubular
o One for non-tubular handlebars
• Shock resistant
• Touch Screen
• Recharge while Using

On the Avera website you can find these 11 types of motorbike holders:

MK-GPS35 for GPS of 8,9 cm (3.5 inch)
MK-GPS43 for GPS of 10,9 cm (4.3 inch)
MK-GPS550 for GPS of 12,7 cm (5 inch) 
MK-GPS6 for GPS 15,2 cm (6 inch) 
MK-SMARTPHONE for universal applications 
MK-GALAXY NOTE 
MK-IPHONE4 
MK-IPHONE5 
MK-SMART HC 
MK-HC IPHONE6 
MK-HC IPHONE6PLUS 

For those riding any kind of (motor)bike these holders can be a valuable protection of their GPS or smartphone.