Tag Archives: Gear Keeper

IN CLOSE QUARTERS OR WHEN CLIMBING, RETRACTABLE TETHER KEEPS HEAVY TOOLS CLOSE TO BODY.

Posted on 13th October 2016 | Comments Off on IN CLOSE QUARTERS OR WHEN CLIMBING, RETRACTABLE TETHER KEEPS HEAVY TOOLS CLOSE TO BODY.

Below an article about the GearKeeper RT3-5605. When working on Heights it is important to tether all tools and items you bring up. Because when dropping tools or other items hughe accidents can happen.

Minimize dangling tool entanglement with new Gear Keeper® heavy-tool retractable tether.

gearkeeper-with-screw-machine

Photo: RT3-5605

RT3-5605 is engineered so that the tool, application and recoil/retraction force are in balance. Designed to avoid worker fatigue in order to maintain productivity, only minimal force is necessary to extend the RT3-5605 tether for use.

Gear Keeper’s new RT3-5605 heavy-tool retractable tether’s ultra low profile keeps tools close to the body when stored while still allowing complete accessibility when in use. The retractor employs a very low 198 gram (7 oz) force to avoid arm strain when extended, but strong enough to keep the line taught to avoid snagging or interference with the work being performed. The retractor mechanism’s force is designed to retract the lanyard, not the tool. When the tool is retracted, lanyard exposure is minimized to avoid snagging, especially when the tool is also placed in a tool bag/pouch.

Using a retractable tether for heavy hand tools is particularly important when working in close quarters or climbing. Gear Keeper’s new RT3-5605 heavy-tool retractable tether’s ultra low profile keeps tools close to the body when stored while still allowing complete accessibility when in use.

The RT3-5605 heavy-tool tether has a generous reach that extends more than 139 cm (55”).

gearkeeper-with-screw-machine-2

Photo: Low retraction and arm length reach

Like other retractables in the Gear Keeper line, the RT3-5605 is engineered so that the tool, application and recoil/retraction force are in balance. Designed to avoid worker fatigue in order to maintain productivity, only minimal force is necessary to extend the RT3-5605 tether for use.

The RT3-5605 heavy-tool tether has a generous reach that extends more than 139 cm (55”). The strong, impact absorbing Nylon webbing for tools up to 1.58 Kg (3.5 lbs) does not require an additional shock absorbing lanyard end. Tools are attached via a Stainless Steel, thumb-controlled, locking-gate carabiner. The RT3-5605 also reduces arm strain when working with heavier tools; the tether features a thumb-controlled gear lock to secure the tool at any extension length. Included with the tether is a lanyard loop strap that can adapt virtually any tool of appropriate weight to be cinched securely to the tether.

According to John Salentine, VP of Hammerhead Industries, “Workers do not have to dance around a long, dangling tether or drag their tool on the floor.” Salentine added, “This unique heavy-tool retractor makes work safer, more efficient and simplifies every repair, maintenance or manufacturing project.”

RT3-5605 retractable heavy-tool tethers including the lanyard loop strap retail for Euro 35.99 excl VAT per unit. For bulk pricing (50 or more) call Avera-Distributing. The full line of Gear Keeper instrument tethers and accessories are available on the company’s website at gearkeeper.eu.

A free, sixteen-page “Safety Engineer’s Guide to Tool Tethering” containing a tethering guide for tools with and without attachment points and related product information is available. Use this link to get your free copy: http://www.avera.nl/promotion.asp .

Also two video’s are available:

Video 1: https://www.youtube.com/watch?v=JQGny6RDCCA

Video 2: https://www.youtube.com/watch?v=uqzUfI2xTx0

Comments Off on IN CLOSE QUARTERS OR WHEN CLIMBING, RETRACTABLE TETHER KEEPS HEAVY TOOLS CLOSE TO BODY.

Posted in GearKeeper

Tagged , , , , ,

New Gear Keeper Retractable Tether For Medium-Size Flashlights

Posted on 28th December 2015 | Comments Off on New Gear Keeper Retractable Tether For Medium-Size Flashlights

New retractable tether features a carabiner clip offering a secure turnout coat attachment for 3C /8AA flashlights.

RT4-4465 Photo
Laden with tools and running through blinding smoke during a dangerous fire, firefighters must react quickly when it comes to making a life-saving decision. There’s no time to waste fumbling for a flashlight. Gear Keeper’s new RT4-4465 carabiner retractor safely secures a flashlight against loss while always keeping it easily accessible.

The Gear Keeper retractable RT4-4465 (€ 24.99) flashlight attachment tether offers an aluminum carabiner featuring a gentle extension/retraction 450 gram (16 oz.) force with an arms-length 56 cm (22”) strain-free reach. Firefighters need only grab their light, use it and let it go; it will always be right where they need it. When the situation requires it, the RT4-4465 employs a patented Q/C release system enabling the flashlight to be easily detached for use at a moment’s notice.

The RT4-4465 flashlight retractor joins the broader family of Gear Keeper flashlight retractors. When selecting the perfect fit for all of the popular firefighter flashlights, the Gear Keeper flashlight retractor line offers snap-clip retractors for small (4AA-2C) and medium (3C-8AA) flashlights; carabiner, brass and stainless steel clip retractors for large (3C/ 4C/ rechargeable) flashlights. Options include threaded stud mounted stabilizer kits that eliminate the annoying swinging and dangling associated with firefighter flashlights.

RT4-4465 PHOTO PRODUCT IN PACKIND“When involved in a fire rescue it goes without saying that it is extremely important to have your gear readily accessible,” says John Salentine, Vice President and co-founder of Hammerhead Industries, which manufactures Gear Keeper systems. “While all of our products at Gear Keeper are designed to meet very specific needs, everything centers on our expertise in creating solutions for situations when holding onto the gear with your hands alone is simply not an option.”

For more information about the new RT4 Series Gear Keeper with Carabiner,
or other Gear Keeper Products contact the European sales office at Avera-Distributing in The Netherlands.

Comments Off on New Gear Keeper Retractable Tether For Medium-Size Flashlights

Posted in GearKeeper

Tagged , ,

TOOL TETHERS: GEAR KEEPER’S UNIQUE POLYURETHANE ELASTIC CORE OFFERS 250% STRETCH FOR STRESS-FREE SAFETY.

Posted on 24th October 2015 | Comments Off on TOOL TETHERS: GEAR KEEPER’S UNIQUE POLYURETHANE ELASTIC CORE OFFERS 250% STRETCH FOR STRESS-FREE SAFETY.

Untitled-1We like to share a BLOG from GearKeeper.

Ergonomically constructed personal tool tethers are the key to maximizing worker productivity, convenience, safety and compliance. For heavy tools up to 11,3 Kg (25 pounds), Gear Keeper’s ergonomic anchored tool tether series is unique because it has been designed with a low-force polyurethane elastic core that has a 1:3 stretch factor (i.e. 90 cm (3’) relaxed – 270 cm (9’) extended. As a result, the new Gear Keeper polyurethane elastic core tethers have the shortest retracted length combined with the longest extension length offering significantly more stretch and retraction than competitive bungee-type core tethers.

The ability of Gear Keeper’s polyurethane elastic to retract to one-third of its extended length is a compelling safety advantage. The reduced length helps to avoid entanglement issues when climbing or working in close quarters. Additionally, to protect against dangerous ‘drop shock’, the new Gear Keeper heavy-tool tethers are load tested with a built-in safety margin beyond the breaking point.

Both of Gear Keeper’s new TL1-4021 and the TL1-4025 anchored tethers, with their polyurethane elastic cores, employ a very low stretch force. This minimizes arm fatigue at full extension, while still providing the proper degree of comfortable recoil. Employees will find their work more convenient and will appreciate the significant reduction in arm-stress. The ultimate result will be higher employee compliance with your tethering program.

The model TL1-4021 (€ 46,99) specifications include 2,54 cm (1”) tether webbing and two stainless steel carabiners load rated above 500 kgs (1100 + lbs.) with gates that do not hang up from a side load. It has a retracted length of 104 cm (41”) and extended length of 300 cm (118”).

The model TL-4025 (€ 42,99) specifications also includes a 2,54 cm (1”) tether webbing but has one stainless steel carabiner and a fixed web tool attachment loop. It has a retracted length of 127 cm (50”) and and extended length of 300 cm (118”). Both models are of an adequate length to attach to buckets.

For more information about the new Gear Keeper Tethers — or any of the companyʼs other innovative tethering products, the full line of Gear Keeper’s tool and instrument tethers, lanyards and accessories call
Avera-Distributing The Netherlands +31 76 596 3820.
You may also visit www.gearkeeper.com or www.gearkeeper.eu

Comments Off on TOOL TETHERS: GEAR KEEPER’S UNIQUE POLYURETHANE ELASTIC CORE OFFERS 250% STRETCH FOR STRESS-FREE SAFETY.

Posted in GearKeeper, Scanners / Receivers / Software

Tagged , , , ,

NEW RT4 SERIES GEAR KEEPER® WITH CARABINER CLIP GIVES NEW ALTERNATIVE FOR TACTICAL AND MILITARY PERSONNEL

Posted on 22nd September 2015 | Comments Off on NEW RT4 SERIES GEAR KEEPER® WITH CARABINER CLIP GIVES NEW ALTERNATIVE FOR TACTICAL AND MILITARY PERSONNEL

Custom Aluminum Carabiner Keeps Items On Your Person,
Secure and Accessible
1RT4 model with Carabiner Clip and Q/C-1 connection.

In an effort to offer the widest range of attachment options to fit the wide variety of tactical and military personnel needs, Hammerhead Industries introduces the new RT4 Series Gear Keeper featuring a Carabiner Clip, a general mounting system designed so you can grab your gear, use it, and know it will retract back into place until you need it next.
Perfect for tethering all types of necessary tactical gear from GPS handheld units to flashlights, the RT4 Series with Carabiner Clip comes in a variety of retraction force options and extension lengths for whatever gear you need to keep close and accessible on your next mission.

The new custom aluminum Carabiner is integrated into the mount and designed to have a short extension allowing you to keep your gear as close to your person as possible when stored. This helps to keep gear from clattering around, and maintaining a quiet presence, important when in the field. The lightweight aluminum is extremely strong and has a wide opening for easy attachment to a large D-ring or a belt loop.

Designed like other Gear Keeper products to be as durable as possible in some of the most severe environments, the RT4 Series’ retractable mount has a patented flushing system that clears sand and debris from the unit. It is also salt-water proof and features a patented Q/C Connector System, which provides for quick and easy connection/disconnection of gear.

The retractable line is constructed of high tensile Spectra/Nylon and coupled with stainless steel spring hardware all in a high-impact casing. All this makes for a device that boasts superior overall integrity and will be able to take knock after knock in the field.

Available in a variety of sizes to accommodate different size and weight gear.
The Model RT4-0040 has a retraction force of 85 gram (3 oz.) and extends to 91 cm (36 inch) ideal for lighter items. Model RT4-0061 has a retraction force of 170 gram (6 oz.) and also extends to 91 cm (36 inch) perfect for a small tactical light.
The RT4-0064 has retraction force of 255 gram (9 oz.) enough for a GPS unit and extends to 81 cm (32 inch).
Finally, the brand new RT4-0065 has a retraction force of 453 gram (16 oz.) and extends to 56 cm (22 inch) for even heavier items.

2
RT4-4465 for the Fire Fighters market with larger Q/C-2 connection,
Retractie 453 gram.

In addition to the Carabiner attachment, RT4 Series Gear Keeper general mount is also available in other mounting options including a threaded stud mount, a Velcro strap mount, and a heavy duty snap clip.

The original Geer Keeper system was engineered specifically for SCUBA diving literally born out of a need to secure items in situations when hands are otherwise occupied. Gear Keeper systems are now available in more than 3,000 configuration options and used in applications from law enforcement, military and hiking to fishing, hunting and trucking.

For more information about the new RT4 Series Gear Keeper with Carabiner, or other Gear Keeper Products contact the European sales office at Avera-Distributing in The Netherlands.

Comments Off on NEW RT4 SERIES GEAR KEEPER® WITH CARABINER CLIP GIVES NEW ALTERNATIVE FOR TACTICAL AND MILITARY PERSONNEL

Posted in GearKeeper

Tagged , , , ,

Gear Keeper® Retractable Tool Lanyard Systems meet IAQG, NAFPI and NCATT Foreign Object Elimination (FOE) standards for securing loose tools

Posted on 14th April 2014 | Comments Off on Gear Keeper® Retractable Tool Lanyard Systems meet IAQG, NAFPI and NCATT Foreign Object Elimination (FOE) standards for securing loose tools

plaatjeAviation and aerospace safety engineers concerned with Foreign Object Elimination (FOE) can choose from an extensive array of Gear Keeper stock and custom tethering systems.

Virtually eliminating a tool left behind, aviation maintenance and repair service employees can use the tool and then let it go as it safely returns to Gear Keeper’s secure tool storage position.

A tool inadvertently left behind during a maintenance or repair service has the potential to bring down a plane. At best it can cause repairs, flight delays, plane changes and fuel inefficiencies. Internationally, Foreign Object Damage (FOD) costs the aviation industry about Euro 10.000.000.000,00 per year in direct and indirect costs. A recent Insight SRI survey4 indicated that 300 of the world’s largest airports, which collectively service about 55 million aircraft movements per year, have reported more than 60,000 FOD incidents. Fortunately, many of these instances can be virtually eliminated by a Gear Keeper retractable tool tethering system that will prevent anyone from leaving a tool behind.

Aviation and aerospace safety engineers concerned with Foreign Object Elimination (FOE) can choose from an extensive array of Gear Keeper stock and custom tethering systems. Manufactured in the U.S.A. by Hammerhead Industries, the Gear Keeper line of tool and instrument tethering systems is the world’s largest and most comprehensive. With over 3.000 different lanyards and retractable tethering configurations, a Gear Keeper system will fit virtually every aviation/aerospace tool or application.

The patented Gear Keeper Retractor is at the core of an extensive product line utilizing four different retractors from light to heavy duty. Each of the retractor mechanisms is engineered for retraction forces that are balanced for the weight of the tool being used. The result is effortless extension and retraction without arm strain or harmful “snap-back.” An employee can use the tool and then let it go as it safely and automatically returns to Gear Keeper’s secure tool position.

The modular Gear Keeper system has an impressive array of benefits and features including; lanyard lengths from 70 to 107 cm, patented self-flushing system (that clears sand and debris), salt-water proof, withstands high-temperature environments, keeps tools close to the body thereby avoiding potential entanglement issues and a ratcheting gear that minimizes lanyard length and arm strain. There is also a large selection of mounting options for attaching the lanyard to the user including a 360° Rotating Belt Clip Mount, Threaded Stud Mount, Heavy Duty Snap Clip Mount, Velcro Strap Mount and Epaulet Mount.

For more information about the Gear Keeper Modular Retractor System — or any of the company’s other innovative tethering products, the full line of Gear Keeper’s tool and instrument tethers, lanyards and accessories contact the European distributor Avera Distributing in The Netherlands.

Comments Off on Gear Keeper® Retractable Tool Lanyard Systems meet IAQG, NAFPI and NCATT Foreign Object Elimination (FOE) standards for securing loose tools

Posted in GearKeeper

Tagged , , , , , , , , ,

NEW HEAVY-INSTRUMENT RETRACTABLE LANYARDS ELIMINATE ENTANGLEMENT DANGER

Posted on 28th March 2014 | Comments Off on NEW HEAVY-INSTRUMENT RETRACTABLE LANYARDS ELIMINATE ENTANGLEMENT DANGER

Secure Bar Code Scanners, Radios, GPS Systems and Other Heavy Instruments Against Loss or Damage with Gear Keeper® “Magnum®” Retractable Lanyards While Minimizing The Danger of “Dangling Tether” Entanglement.

Eliminating entanglement issues, Gear Keeper’s new Magnum series of low profile heavy-instrument retractable lanyards safely tether instruments weighing up to 2 Kg.. Designed for maximum productivity the new Magnum retractables keep instruments close to the body when stored while still allowing complete accessibility when in use. This is particularly important when working in close quarters or climbing. The Magnum retractable lanyards are available in three forces to match the weight of the instrument.

afb 1
Gear Keeper instrument tethers are designed for heavy-duty industrial use with maximum breakage strength and durability.

Workers at retail stores, shipping companies, supermarkets and warehouse operations handle bar code scanners on a regular basis, but while these instruments are critical to inventory and tracking systems they are easily broken when dropped and often misplaced or not available when their needed. However, instrumentation tethers from Gear Keeper can prevent loss and damage while making the devices easier to use.

Like other retractable tethers in the Gear Keeper line, the Magnum series is engineered so that the instrument, application and recoil/retraction force are in balance. When the lanyard is extended for use, only minimal force is necessary thereby avoiding worker fatigue or in the reverse, causing a ”kick” when the instrument is automatically guided back to its stored position.

“Electronic instruments like bar code scanners, GPS systems and portable radios are expensive and because they are hand held they can be easily dropped,” says John Salentine, Vice President and co-founder of Hammerhead Industries, which manufactures Gear Keeper systems. “It not only makes financial sense to secure these types of devices with a tether, but it also makes them easier for your employees to use.”

afb 2
Photo: RT3-4548

The RT3-45XX series (Euro 54.99 each) includes a carabiner to attach to a D-ring or belt loop and a carabiner that attaches to the instrument. The models include; RT3-4548 with a 56 cm reach for instruments up to 1.3 Kg.; RT3-4558 with a 56 cm reach for instruments up to 1.6 kg and RT3-4568 with a 40 cm reach for instruments up to 1.9 Kg.
With millions of systems in use, Gear Keeper devices have a failure rate of less than .001 percent.

The full line of Gear Keeper instrument tethers and accessories are available on the s website at www.avera.eu or www.gearkeeper.eu

Comments Off on NEW HEAVY-INSTRUMENT RETRACTABLE LANYARDS ELIMINATE ENTANGLEMENT DANGER

Posted in GearKeeper

Tagged , , , , ,

FINE TUNE WRIST LANYARDS FOR MAXIMUM WORKSITE SAFETY, INCREASED PRODUCTIVITY AND EASE OF USE.

Posted on 17th March 2014 | Comments Off on FINE TUNE WRIST LANYARDS FOR MAXIMUM WORKSITE SAFETY, INCREASED PRODUCTIVITY AND EASE OF USE.

Gear Keeper® Modular Wrist Lanyard Systems For Small Hand Tools Offers Many Tethering Options.
a
Gear Keeper’s new retractable and non-retractable wrist lanyard systems for tools up to 2.5 Kg. are particularly valuable when a short drop length is critical or when climbing or working in close quarters. Productivity is increased by the company’s patented Quick Q/C and Q/C-II Connect tool attachment connectors that permit secure, fast and easy connection / disconnection of tools. Users can change out and use many tools with just one lanyard by fitting additional male connectors to all tools being used and merely unclick one tool and attach another.
The modularity of Gear Keeper tethering system offers the flexibility needed to safely and specifically match the tool, worker and application. Unlike an ‘off-the-shelf’ lanyard, which can actually become a safety hazard, all Gear Keeper tethering systems insure dependable safety and quality by the company’s stringent quality control systems. QA includes dynamic and static testing, drop load testing with up to a 100% safety margin and cycle testing for safe productive use and long-life.
Two Gear Keeper wrist lanyards that are among the popular choices of safety engineers are the model TL1-2006 Retractable Wrist Lanyard for tools up to 0,5 Kg and the non-retractable model #TL1-2007 Deluxe Wrist Lanyard for tools up to 2,5 Kg. Both types offer Velcro wrist straps and are available in high visibility safety orange with serial numbers to satisfy traceability standards.

TL1-2006

The TL1-2006 Retractable Wrist Tether offers a 100cm extension and comes complete with the model #ACO-0926 Q/C II Elastic Lanyard Connector. Suggested retail for the TL1-2006 Retractable Wrist Lanyard is € 32,49. Additional connector accessories include a 7,5 cm Load Bearing Aluminum Carabiner model #3-0069-03 – € 2,79, and extra male Q/C II elastic lanyard connectors model #ACO-0926 are € 4,99 each.

TL1-2007

The TL1-2007 Deluxe Wrist Lanyard (non-retractable) comes complete with the model #ACO-0206 a 33 cm Nylon Lanyard connector. Suggested retail for the TL1-2007 Deluxe Wrist Lanyard is € 16,49.

ACCESSORIES
Accessories include a 7,5 cm Load Bearing Aluminum Carabiner model #3-0069-03 – € 2,79, and 15 cm and 33 cm lanyard nylon connectors for € 4,99 (15 cm reach) and  € 5,99 (33 cm reach).

Comments Off on FINE TUNE WRIST LANYARDS FOR MAXIMUM WORKSITE SAFETY, INCREASED PRODUCTIVITY AND EASE OF USE.

Posted in GearKeeper

Tagged , , , , ,

THREE NEW GEAR KEEPER SUPER COIL™ TETHERING SYSTEMS FOR ANCHORING TOOLS UP TO 11 KG.

Posted on 6th March 2014 | Comments Off on THREE NEW GEAR KEEPER SUPER COIL™ TETHERING SYSTEMS FOR ANCHORING TOOLS UP TO 11 KG.

When Selecting Tool Tethers, Shock Loads Are A Significant Concern For Worker Safety.
1
Three new Gear Keeper Super Coil™ tethering systems for anchoring tools up to 11 Kg.

Tethering heavy tools, generally over 5 Kg, is a significant safety concern.
A dropped 11 Kg tool that is tethered will have a shock load exceeding 150 Kg.
If tethered to a person, it is more than enough to dislodge the worker from his perch. The new, heavy-duty 2,5 cm (1”) Super Coil Anchored Tethering System is easily attached (anchored) to a fixed structure such as high-rise bucket or scaffolding. Anchoring the tether transfers the shock load produced by a dropped tool from the worker to the structure.

Designed for heavy tools and instruments up to 11 Kg, Hammerhead Industries, manufacturers of Gear Keeper industrial tool tethering systems, has announced three new 2,5 cm (1”) Super Coil anchored tool tethering systems.
Each of the new anchored tethers is intended for attachment to a fixed structure rather than to a person. Engineered to avoid or minimize entanglement, the three new 2,5 cm (1”) Super Coil Anchored Tethering Systems boast a short retracted length 104 cm.

Each of the Super Coil Tethering Systems provides an ample working radius for applications requiring tools like power drills, nail guns, power drivers and other heavier weight tools. The Super Coil’s inner coil system is fully enclosed in rugged nylon orange webbing that increases the tether’s overall strength and durability even under tough on-the-job conditions. The new Gear Keeper models are produced in high visibility orange color and feature a tag that shows the weight of the tool appropriate for the tether as well as traceability info such has date manufactured.

To suit a variety of tethering needs, the ‘Anchored’ tethers are available in three configurations. Options include a choice of drop lengths, and working area dimensions; Non-conductive stainless steel carbineers for tools with attachment points and a fixed loop attachment strap for tools that don’t – for example, when a large handled tool such as a chain saw needs tethering, the worker simply slip-knots the ‘fixed loop’ over the handle.
2
The model TL1-4025 is a flexible, low profile coil system that provides a 3 meter working radius for tools like power drills, nail guns, power drivers and other heavier weight tools.

For tools that have attachment points, the Model TL1-4021 (€ 46,99) has two stainless steel carabiners for attaching to the tool and the structure and provides a 3 meter working area; For tools that don’t have a suitable attachment point, the Model TL1-4025 (€ 42,99) with one stainless steel carabiner for attachment to the structure and a fixed loop for easy attachment to virtually any tool and also provides a 3 meter working area; For shorter drop lengths, the Model TL1-4026 (€ 39,99) with one stainless steel carabiner for attachment to the structure and a fixed loop for easy attachment to the tool; this model provides a 180 cm working area. The company offers bulk discounts for 50 or more units.

“All Gear Keeper tool tether ratings are load tested with up to a 100% safety margin, beyond the break point, to safely handle the shock load,” said John Salentine, VP of Hammerhead Industries. “Tool tethering is a site safety issue and safety starts with the proper mating of the tool, tether and application to ensure productivity and safety in the work environment.”

Comments Off on THREE NEW GEAR KEEPER SUPER COIL™ TETHERING SYSTEMS FOR ANCHORING TOOLS UP TO 11 KG.

Posted in GearKeeper

Tagged , , , , , , ,

AT THE DROP OF A HAT… YOU COULD CAUSE A LOT OF DAMAGE TO THE WORKSITE.

Posted on 22nd February 2014 | Comments Off on AT THE DROP OF A HAT… YOU COULD CAUSE A LOT OF DAMAGE TO THE WORKSITE.

New Retractable Gear Keeper© Hardhat Lanyard adds more security to fall-protection harness systems.

1 helm
The new hardhat lanyard is load tested to safely tether all commonly used industrial hardhats. The RT5-5601 is easily attached with Velcro strap loops and cinches around the fall protection harness strap, ring or tri-bar.

In the unfortunate event of a fall, a fall-arrest harness will protect the worker, but as his hardhat continues the descent, a fall-arrest harness won’t protect the work site. Designed for use with all fall-protection harness systems, the retractable RT5-5601 Hardhat Lanyard System is the missing safety link.

Dropped from aloft, a hardhat is a one-pound unguided missile that endangers the entire worksite. It’s an accident that can be virtually eliminated with Hammerhead Industries’ innovative Gear Keeper RT5-5601 Hardhat Lanyard Retention System.

The new hardhat lanyard is load tested to safely tether all commonly used industrial hardhats. The RT5-5601 is easily attached with Velcro strap loops and cinches around the fall protection harness strap, ring or tri-bar. It is designed to keep the lanyard close to the body to avoid discomfort and entanglement.

The new lanyard uses a sturdy, industrial-grade spectra/nylon line that extends up to 35 centimeter. For additional safety, the Gear Keeper Hardhat Lanyard model RT5-5601 features a gentle 70 gram retraction force that takes up any unused slack. And, when it’s time to break for lunch, the Gear Keeper hardhat lanyard allows the worker to take off his hardhat and drape it over his shoulder for safekeeping.

With the new Gear Keeper Hardhat Lanyard, securing a hardhat is quick and easy thanks to the unit’s convenient snap clip mount. The retractable lanyard’s stainless steel spring, hardware and high-impact case allow it to stand up to daily rigorous use of workers on the job. And, when workers are ready to call it a day, Gear Keeper’s patented Quick Connect™ System allows the hardhat to be easily disconnected without completely removing the lanyard’s base.

The Hardhat Lanyard System model RT5-5601 retails for € 14,99 excl VAT.. Contact Avera-distributing for special bulk pricing.

“All Gear Keeper lanyard and tether ratings are load tested with up to a 100% safety margin, beyond the break point, to safely handle the shock.

2 gk
The guide’s ‘Select the Right Tether in Four Easy Steps’ chart is designed as a quick reference that will aid safety professionals when selecting appropriate tethers for tools up to 12 kilogram load,” said John Salentine, VP of Gear Keeper.

“Gear tethering is a site safety issue and safety starts with the proper mating of the tool, tether and application to ensure continued productivity and safety in the work environment.”

Comments Off on AT THE DROP OF A HAT… YOU COULD CAUSE A LOT OF DAMAGE TO THE WORKSITE.

Posted in GearKeeper

Tagged , , , , ,

MILIPOL 2013 IN PARIS FRANCE

Posted on 1st December 2013 | Comments Off on MILIPOL 2013 IN PARIS FRANCE

Every two years there is the MILIPOL exhibition in Paris, a trade show for Police and Military. This video starts with the Avera booth where we promote GearKeepers. The rest are shots of several booths at the show that give an impression of the products shown at Milipol. In Europe the NSA is big news, but this year at Milipol there are many suppliers for ‘Big Data Collection’. Ofcourse there are also the guns, flashlights and a lot of other items that link to police and military operations.
Watch the video:

Avera sold a large number of GearKeepers at Milipol 2013. The 3 person Avera crew was busy all day promoting, selling and giving information about the use of GearKeepers for police and military applications .
The photo shows the Avera crew in the Avera GearKeeper booth.

P1150768

Comments Off on MILIPOL 2013 IN PARIS FRANCE

Posted in GearKeeper

Tagged , , , ,