CT510 is the brand new Dual band UHF/VHF realized with the latest technology in the radio-communication field.Its design and robust frame with the aluminum 
die cast chassis make of CT510 the ideal solution for the professionals who need to stay in touch with colleagues in construction sites, buildings, trade fairs, sport exhibitions, etc.
Extremely compact, to easily wear it, it is only 9,5 cm high and has a thickness of only 2,5 cm.
CT510 is equipped with an alphanumerical keypad, useful to set channels, frequencies and all the main functions.
The new flexible antenna, common to all the CT Midland range, allows to easily wear the radio on a belt.
The display shows the dual band of use or, at your choice, one of the following options:
– Channel number
– Frequency band
– Channel number and relevant frequency
– Channel name
The radio is also equipped with FM radio receiver.
It is also available, as optional accessory, the programming kit PRG-510
COMPLYING TO CE/99/05
COLOR: black
SINGLE PACKING including:
• CT510 transceiver
• Flexible antenna
• Li-Ion battery pack 1300mAh
• Belt clip
• Desktop charger with wall adaptor
• User manual
MAIN FEATURES
• Dual band (VHF/UHF) displayed
• Frequency band:144-146MHz & 430-440MHz (Rx / Tx)
• Operating mode: UHF-VHF, VHF-VHF or UHF-UHF
• Output power: 2W VHF /2W UHF
• 128 channels to store
• VOX function
• 162 DCS codes and 39 CTCSS tones
• ‘VOICE’ function
• SOS emergency function
• Channel spacing selectable between 25kHz and 12,5 kHz
• The display can show at your choice: channel number, frequency, channel number + frequency or channel name
• Inverted frequency function
• Scan
• FM radio receiver
• Frequency step: 5 kHz, 6.25 kHz, 10 kHz, 12.5 kHz, 25 kHz, 37kHz, 50kHz, 100kHz.
• Tx power selectable: high (2W)or low (500mW)
• Li-Ion battery pack 1300mAh
• Desktop charger (for battery pack only)
• Frequency offset: 0-69.950 MHz
• Shift repeater
• Busy channel lockout (BCLO) function
• TX signal strength shown in the display
• Vocal and visual indication of low battery level
• Roger Beep tone at the beginning/end transmission
• TOT (Time out timer) function
• Keypad lock
• Scan of frequencies with CTCSS/DCS
• Channel and function reset
• 1750 tone for repeaters
• External speaker/mike jack: 1 Pin 2,5mm (like MIDLAND 777, to be confirmed)
Specifications are subject to change without notice.